|
More
Plating Agents
Research Library
|
|
Flexsim Software Products, Inc.
|
Agent based simulation has it's roots in theoretical mathematics since the 1940s. The concept has it's basis in the idea of large systems of interacting machine automata which can replicate, learn and reproduce. The early adoption of the technique in the simulation field has been evolutionary and has developed and matured significantly in recent years. Several influential studies in the field ...
|
|
|
Victaulic Company
|
The dual agent fire extinguishing system generates a homogeneous suspension of sub-10 micron water droplets and nitrogen gas that is delivered at relatively high momentum with very low operating pressures relative to existing fire suppression technologies. The combined extinguishing characteristics of water and nitrogen enhance the individual components: coupled with high delivery momentum, the ...
|
|
|
BHS-Filtration Inc.
|
Thin-Cake Filtration Technologies for Removing Activated Carbon, Catalysts and Other Trace Solids From Active Pharmaceutical Ingredient (API) Slurries
The BHS technologies of Vertical Candle Filters and Horizontal Pressure Plate Filters provide improved product quality with more efficient operations compared with manual pressure filters. The different technologies allow for the selection of the ...
|
|
|
BHS-Filtration Inc.
|
Solid-liquid separation can be accomplished by pressure or vacuum filtration in a batch or continuous mode. Generally, following filtration, the cake must be washed and subsequently dried. The choice of technology depends upon a wide range of parameters of the solids (i.e. crys- tal size and distribution, type and shape), liquids (type, temperature, and viscosity) and the process itself. This ...
|
|
|
Larox Flowsys
|
The cement is pneumatically conveyed to the top of the silos. The valves on top of these silos are normally opened or closed periodically. However when they require the valves to open or close, it is necessary for them to be able to do so without trouble and they need to be assured that the valve will close tightly. The reason they require these valves to close tightly is that in many cement ...
|
|
|
|
