Heat Exchange and Transfer, Inc. Heat Exchange And Transfer, Inc, (HEAT) designs and manufactures a complete line of thermal fluid heat transfer systems and electric process heaters. We provide precision temperature control for process heating and...
Multitherm MultiTherm LLC was founded in 1977 by two engineers with extensive experience in liquid phase heat transfer and hot oil systems. They believed that there was a need in the process industry that uses hot oil heaters for...
Flushing Fluid MultiTherm FF-1 ®
Flushing Fluid MultiTherm FF-1®
The Logical First Step in
Heat Transfer System Start-Up!
Purpose
MultiTherm FF-1® flushing fluid is for use in...
Food Grade Mineral Oil MultiTherm PG-1 ®
MultiTherm PG-1® is a high quality food grade mineral oil for use in closed loop, liquid phase heating and cooling systems to 600°F.
Purpose...
Hot Oil Heat Transfer Oil - MultiTherm IG-4 ®
MultiTherm IG-4® is a non-toxic durable
heat transfer oil for use in closed loop,
liquid phase heating systems up to 600°F.
Purpose
A variety of...
Paratherm Corporation Paratherm has been developing new heat transfer fluid products since 1988—products that improve the efficiency and consistency of thermal processing applications. The safety and reliability of these non-toxic,...
Paratherm CR®
The new Paratherm CR® (Patent Pending) heat transfer fluid offers predictable, repeatable performance in cryogenically driven process applications....
Paratherm GLT™
Paratherm GLT Heat Transfer Fluid exhibited almost 40% less degradation when exposed to 600°F (316°C) for 500 hours than a widely used competitive fluid....
Paratherm HE®
The Paratherm HE® high flash and fire point heat transfer fluid is rated for an optimal service range of 150°F to 600°F (66°C to 316°C). Engineered for...
Mokon Mokon, a division of Protective Industries, Inc., has set the standard for high quality circulating liquid temperature control systems since 1955. Engineers at Caplugs/Protective Industries (a line of proprietary plastic...
CHEM Group, Inc. CHEM Group provides entrepreneurial vision and executive leadership to affiliates offering products and services that add value, conserve the world's natural resources, and extend the limits of modern chemical process...
Tuthill Coupling Group Tuthill Coupling Group, comprised of the Hansen, Coupleurs Gromelle and QUICK SEAL brands, provides the world's best and most complete line of quick coupling solutions and leak testing and filling connectors. Our...
Thermal flow measuring technology has come a long way since the introduction of thermocouple technology and early hot wire anemometers. Thermal technologies depend on heat transfer and traditionally operate on differential temperature measurements between two temperature sensitive materials to generate a signal directly proportional to the temperature differential and mass flow rate. Over the ...
Powder Processing Systems for Temperature Controlled Soft, waxy or ductile materials are often difficult to Grinding grind at normal temperatures. Production rates are low and particle size may not be sufficiently fine. Product flow might also be poor. Such materials will usually build up in the mill and cause blockages.
Kemutec are among the pioneers in low temperature size reduction systems. ...
Solid-Liquid Separation Cake Washing & Drying Technologies
For Thin-Cake Filtration Operations The appropriate BHS testing procedures can help direct the selection of pressure or vacuum filtration equipment By Barry A. Perlmutter and ensure optimum equipment operation
Solid-liquid separation by pressure or vacuum, cake washing and drying are integral to producing a chemical or pharma- ceutical ...
Take Care of Your Pumps and They’ll Take Care of You By Jim DeLee, Sr Member Technical Staff Fluid Components International
The old saying, “an ounce of prevention is worth a pound of care” may have been coined by process and plant engineers tired of repairing or replacing pumps. Pumps are often the most under serviced pieces of equipment in process automation when it comes to maintenance and ...
Thermal fluids have proven exceptionally safe during many years of operation in a wide range of industries. However, there is no way to completely prevent fires in these systems because the major components required — fuel, air and an ignition source —
are always present by design.
The potential for a serious fire caused by the thermal fluid system can be minimized by observing sound design ...
Emerging considerations affect fluid transfer design used in modern pharmaceutical or biotechnology processes (termed biopharm herein). These are:
Batch or continuous high performance processes
Assurance of full product/environment containment
Separation of process and mechanical equipment/environments
Cleaning validation (certified cleanability or use of disposable technologies)
Reliable monitoring and treatment of water in oil
refineries is essential for the production of petroleumbased
products, including gasoline, diesel, kerosene,
heating oil, and byproducts for plastics and a variety of
lubricants. There are three process areas within refineries
that require large amounts of water: cooling units, desalter
units and wastewater treatment.
This paper presents the principles to safely operate reboilers within Air Separation Units (ASU's). Two types of reboilers are used in ASU's: thermosyphon and downflow. The features of each are discussed, focusing on the safety aspects. The vast majority of ASU reboilers are Brazed Aluminum Heat Exchangers (BAHX's), because of their high performance.
The general potential reboiler hazards are
• ...
This paper presents the principles to safely operate reboilers within Air Separation Units (ASU's). Two types of reboilers are used in ASU's: thermosyphon and downflow. The features of each are discussed, focusing on the safety aspects. The vast majority of ASU reboilers are Brazed Aluminum Heat Exchangers (BAHX's), because of their high performance.
The general potential reboiler hazards are
x ...
Company descriptions and contact
information are quoted
from the company's website or other promotional information. JAZ'D is not responsible for
the accuracy
of this information. Unless specifically noted, JAZ'D is not sponsored by, affiliated with
or otherwise
connected with any of the listed companies.
