|
More
Corrosion Protection
Research Library
|
|
CSI (Central States Industrial)
|
Gas Tungsten Arc Welding (GTAW) is used in the manufacturing of longitudinally welded tubes and as a standard for the installation of tube systems in the semiconductor and phar- maceutical industries. During visual and/or boroscopic inspection of welds small grey spots might be conspicuous, especially in the downslope area of orbital welds. These slag spots are also referred to as oxide islands. ...
|
|
|
VAC-U-MAX
|
VAC-U-MAX, an industrial vacuum expert, teams up with players in a range of industries to battle flammable, explosive, respiratory, ergonomic, and noise dangers, which are not only OSHA-regulated but also more insidious than many companies realize.
US businesses spend an estimated $170 billion a year on costs associated with work injuries and illnesses - expenditures which come straight out of ...
|
|
|
CSI (Central States Industrial)
|
This review describes the five metallurgical classifications of stain- less steel, the five distinct corrosion mechanisms, welding guidelines and selection methods. Characteristics and specific types of each class of stainless steel are given. Next, the five corrosion mechanisms are explained and guidelines are presented for selecting the proper stainless steel for each corrosive environment. ...
|
|
|
CSI (Central States Industrial)
|
Chemical services of any kind may require special alloys for corrosion resistance, freedom from metal ion contamination, or both. Bioprocessing applications can have even more stringent requirements, due to the high degree of cleanliness required to convey sterile and non-sterile products or solutions. Tubing and/or piping systems, must, therefore meet these requirements in their fabrication, ...
|
|
|
Oseco Ltd
|
It is common for the process engineer to use either in-house or manufacturer software to size rupture disks for ammonia plant safety. Rupture disks are used to protect ammonia plant piping, heat exchangers, and large equipment such as compressors and pumps. While the criteria for sizing is dependent on the application and condi tions (explosive environment, fire conditions, etc.), the conditions ...
|
|
|
|
