|
More
Common Carrier
Research Library
|
|
Charles Ross & Son Company
|
In processing plants around the world, ribbon blenders are used to mix many thousands of products, from fertilizers and plastic resins to flavored coffees and cosmetics. The ribbon blender is one of the most common mixing devices in service today, because it is one of the most versatile and cost-efficient mixers ever created. Its simple design makes it relatively easy to build. Simplicity also ...
|
|
|
Polygon Company
|
Contamination is one of the most common causes for the failure of journal bearings. Metal bearings combat this problem with the use of grease zirks and maintenance schedules that are imposed on the end users. Grease is needed on a regular basis throughout the life of the machine to purge contaminates. This is a result of the inability of the bearing surface to ingest the particulate. ...
|
|
|
FilterPro
|
Fax: 816-869-3858 East Lynne, Missouri 64743
The purpose of this white paper is to provide the correct way to measure the diameter of a filter bag when searching for an alternate vendor.
In the filter industry it is very common for O.E.M.’s to give nominal sized when a filter bag is supplied with an industrial dust collector.
According to Dictionary.com nominal size is defined as:
“Number ...
|
|
|
Asahi America
|
Water treatment applications that pass the acid test
Over the past several years, many water treatment plants in the southeast United States faced troubles with their existing piping systems that used sulfuric acid as a method of chemical dosing. Problems have included pipeline damage, leaks, joint failures, chemical spillage and downtime. It has been determined that these problems have been ...
|
|
|
GE Analytical Instruments
|
Sample matrices are known to create analytical obstacles during routine Total Organic Carbon (TOC) analysis. Until now, interferences from sample matrices have caused calibration curve stability to be sacrificed. Some common aggressive matrices require frequent maintenance, and weekly, or even daily recalibration. By re-engineering the sample flow path and the oxidation technique, GE Analytical ...
|
|
|
|
