|
More
Actuators and Positioners
Research Library
|
|
Kemutec
|
Powder Processing Try Us! Kemutec's Technical Center is one of the most comprehensive powder processing test facilities in North Technical America. Fully equipped to demonstrate full-scale production, pilot and lab size equipment, the facility allows for first hand evaluation and recording of trial results. The Testing Facility is equipped to test special Center requirements, including grinding ...
|
|
|
Powder Technologies Inc.
|
The basic design of the sanitary butterfly valve used in the pharmaceutical, chemical and food industries has remained essentially unchanged for a number of years. See a new and improved butterfly valve. There are a number of detail differences between the products proposed by different manufacturers, and a series of considerations which determine the suitability of such a valve.
DISC ...
|
|
|
Larox Flowsys
|
Valves and related equipment in lime slurry service need to be selected carefully to prevent freeze-ups and other process disruptions
Lime is used by a large majority of the chemical process industries in either a powder or liquid form. Engineering and maintenance personnel often face a long — and potentially expensive — trial-and-error process to find the best process equipment to handle ...
|
|
|
Blue Level Technologies, Inc.
|
White Paper Copyright© 2009 Cougar Industries, Inc.
The Tilt Switch has been used for high level detection of bulk solid materials for decades. This device is simple to understand and apply. It has relatively good life and reliability when properly applied. Most devices have been based on mechanical means of actuation or on the use of mercury-switches to sense the presence of the material. ...
|
|
|
Max Machinery Inc
|
HIGH RESOLUTION, ACCURACY AND REPEATABILITY
Hydraulic valves, pumps and actuators face the most stringent testing of any industrial product. Liquid flow measurement is used as a fine tuning process to monitor the machining and assembly of the hydraulic component to achieve the desired flow characteristics. Subsequently, flow measurement is used again during 100% certification of performance over ...
|
|
|
|
